Cement based fine grout used to close joints, with high elasticity, composed of high quality marble sand with
selected granulometry, high content of synthetic resins and hydrophobic agents. It provides high resistance to
humidity and abrasion. Suitable for filling joints from 0-4mm. Classified as a CG2 product based on the standard
EN 13888. It is characterized by a very good workability, very easy in cleaning, good adhesion, high resistance of
sunlight , and atmospheric agents, has the ability to maintain color, resistant to corrosive agents, various acids and bases. Available in 26 different colors.
FIELD OF APPLICATION
ULTRAFUGA FF is used for plastering ceramic tiles, Gres porcelain, mosaic tiles for external and internal use.
Recommended for closing the joints in environments where there are vibrations, in room central heating, terraces and pools. Not recommended for filling the joints with width greater than allowed.
PREPARATION OF THE MIXTURE
Mix 1.2-1.6 liter of water with a bag of 5 kg of powder product in a clean container with an electric mixer until
you reach a homogenous mass and without grains. Consider that the mixed material for the joints in the floor has to be more liquid than for joints in walls.
PPREPARATION OF THE SUPPORT
Grouts that will be used have to be clean, free of adhesive or mortar in all its thickness. Not recommended
application on wet supports..
Apply the product on the joints with a rubber spatula or with spatula machinery. After 20 minutes when the
product is sustainable, it is made the cleaning of the remaining parts with a sponge in a transverse way with the
direction of joints.