Form: Powder
Packaging: Plastic packaging 2 kg in boxes of 16 kg on pallets of 576 kg (36 boxes) and 5 kg
in boxes of 20 kg on pallets of 720 kg (36boxes)
Color: Available in 18 colors
Water for mixture: 1.2-1.6 liters of water for 5 kg
Storage: Store in a dry place on wooden pallets.
Storage time: 12 months from the manufacture date
pH of the mixture: 13
Grouting on the wall after application of adhesive: 4-8 hours.
Grouting on the floor after application of adhesive: After 24 hours
Workability time:2 hours
Cleaning of joints: After 20 min
Density: :1.4 gr/cm3
Set to light foot traffic: After 24 hours
Application temperature: +5°C to +35°C
Resistance on temperatures: -30°C to +80°C
Compression strength in 28 days:15 N/mm2
Compression strength after cycles of freeze /thaw:15 N/mm2
Flexural strength in 28 days: ≥ 2.7 N/mm2
Withdrawal: ≤ 3 mm

Powdery product cement based used to close joints, composed of high quality marble sand with selected granulometry, synthetic resins and hydrophobic agents. High resistance to humidity and abrasion. Suitable for filling joints from 2-15 mm. Classified as a CG2 product based on the standard EN 13888. It is characterized by a very good workability, very easy in cleaning, good adhesion, high resistance of sunlight, and atmospheric agents, has the ability to maintain color, resistant to corrosive agents, various acids and bases.

DEFUGA GG is used for plastering ceramic tiles, Gres porcelain, mosaic tiles, for external and internal use. Not recommended for filling the joints with width greater than allowed. In the case of applications for areas exposed to high traffic or under the influence of chemicals we propose that the product reinforced with FUGALASTIC Dekoll.


Mix 1.2-1.6 liter of water with a bag of 5 kg of powder product in a clean container with an electric mixer until you reach a homogenous mass and without grains. Consider that the mixed material for the joints in the floor has to be more liquid than for joints in walls.

Grouts that will be used have to be clean, free of adhesive or mortar in all its thickness. Not recommended application on wet supports.

Apply the product on the joints with a rubber spatula or with a spatula machinery. After 20 minutes when the product is sustainable, it is made the cleaning of the remaining parts with a sponge in a transverse way with the
direction of joints.