TECHNICAL DATA

Form: Powder
Packaging:In sacks of 25 kg on pallets of 1350 kg
Color:Grey, White
Consumption: 3-5 kg / m2
Storage:: Store in a dry place on wooden pallets.
Storage time:: 12 months from the manufacture date
Density: 1.5gr/cm3
Reaction to fire: Class A1
Water demand:ër përzierje: 6-6.5 liters of water per 25 kg
pH of the mixture: 13
Application temperature: +50C to +350C.
Adjustability time: 30min
Grouting on the walls: After 8 to 12 hours
Grouting on the floor: After 24 hours
Set to light foot traffic:: After 24 hours
Adhesive strength after 28 days: ≥ 0,5 N/mm²
Adhesive strength after water immersion:ë shtypje: > ≥ 0,5 N/mm²
Adhesive strength after heating reaction:ësh: ≥ 0,5 N/mm2
Adhesive strength after thaw-freeze cycles:ë ujë: ≥ 0,5 N/mm²
Adhesive strength after 30 min:: ≥ 0,5 N/mm²
Slippery:: ≥ 0,5 N/mm²

adhesive, a cement-based
product (C), with normal adhesive strength (1) and resistant to slipping (T). It is characterized by a very good workability, resistant to humidity, optimal adjustment time and a uniform durability. It is classified as C1T according to the EN 12004.

FIELD OF APPLICATION

It is suitable for the adhesion of ceramic tiles, gres-porcelain, cementbased,on the walls and on the floor for indoor and outdoor applications. Suitable for tile adhesion, dimensions: 5-40 cm.

PREPARATION OF THE MIXTURE

All types of cement-based supports must be cleaned before applying the product. The support may contain materials such as: dust, oils or various residues which adversely affect the adhesive strength of the product. The
cleaning of the support must be done mechanically. Before applying the product, the surface of the support must be wet in order to create a better adhesion and an optimal workability time.

PREPARATION OF THE SUPPORT

All types of cement-based supports must be cleaned before applying the product. The support may contain materials such as: dust, oils or various residues which adversely affect the adhesive strength of the product. The cleaning of the support must be done mechanically. Before applying the product, the surface of the support must be wet in order to create a better adhesion and an optimal workability time.

PDF:

VERTIKOLL

APPLICATION

Initially, it is recommended to apply the product with the smooth part of the screed to have a more uniform distribution and then with the serrated part. For the application it is used a suitable screed depending on the type of the tile that the product is applied. Tiles are placed by using a slight pressure on tile in order to make sure that the surface of the tile is covered with adhesive. According to the dimension of the indenter
screed and the type of the support, consume is 3-5 kg/m².